Launchpad

Step 1: Verify the Token
  1. 1.
    Input your token address, if you already have one, or create a new token for the Launchpad.
  2. 2.
    Enter the created token address on the Token Address text field. And click the validate button.
3. After clicking the validate token, the token details will be shown and you can click on “Click to approve”.
4. MetaMask will now ask you to confirm the transaction. It will also show you the fee you must pay for that transaction. If you agree, click the “Confirm” button to finish the process.
Step 2: Defi launchpad Info
After verifying your token, you need to input the Launchpad information that you want to raise. Here are some following important parameters:
  • Sale Method: There are two types of methods for a launchpad, Pre-sale and Private-sale.
  • Pre-sale: Before adding the liquidity in the dex platform, the token owner sells their token on the launchpad platform.
  • Private Sale: Sells some amount of token in the launchpad platform.
  • You must use positive numbers.
  • Pre-sale rate: The presale rate means shows how many tokens they will receive during the presale stage.
  • The soft cap must be greater than or equal to 50% of the hard cap.
  • The maximum limit is greater than the maximum buy limit
  • For refund types, you can choose a refund or burn from the dropdown list.
  • PancakeSwap liquidity (%): Enter the percentage of raised funds that should be allocated to liquidity on PancakeSwap. The minimum value is 51%, and the maximum value is 100%.
  • Listing rate: rate for the dex platform.
  • The start time must be before the end time.
You can check the total tokens needed to create the presale pool (shown above the Back/Next buttons).
Check the image below to know what you need to input in the fields in this case:
Step 3: Add Additional Info
There are some notes for this step:
  1. 1.
    Logo URL and website are required fields, and cannot be blank. You can’t complete this step without those.
  2. 2.
    The logo URL must end with a supported image extension: png, jpg, jpeg or gif. For example https://www.blockchainx.finance/bx.png
  3. 3.
    Click Next after inputting.
Check the image below to know what you need to input in the fields in this case:
Step 4: Finish
  1. 1.
    This is the final step. You can review all the information one last time before submitting it. Click “Submit” after you have made sure that everything is perfect, or you can go back to the previous step to make any changes.
2. MetaMask will now ask you to confirm the transaction. It will also show you the fee you must pay for that transaction. If you agree, click the “Confirm” button to finish the process. Confirm all three transactions.

Update launchpad details:

Check out the below steps for creating a launchpad with BxFinance using your MetaMask wallet.
  1. 1.
    Connect your wallet.
  2. 2.
    Click the Token Launchpad on the nav bar.
3. Click on “Launchpad List”.
4. Click on "View Pool". Button for your pool.
5. Click on the edit button as seen in the image below.
6. You can edit the following fields: Logo URL, Website, Facebook, Twitter, Github, Telegram, Reddit, and Launchpad description.
  • Logo URL and website are required fields, and cannot be blank. You can’t complete this step without those.
  • The logo URL must end with a supported image extension: png, jpg, jpeg or gif. For example https://www.blockchainx.finance/bx.png
Buy a token in launchpad:
Check out the below steps for buying a token in launchpad with BxFinance using your MetaMask wallet.
  1. 1.
    Connect your wallet.
  2. 2.
    Click the Token Launchpad on the nav bar.
3. Click on “Launchpad List”.
4. Click on "View Pool". Button for your preferred launchpad pool.
5. Wait until the launchpad sale comes to live, you can get the sale live date and time details on the sale details page.
6. Once the sale moves to live, then the buy token button getting enabled on the sale details page
7. Enter the token amount in the amount text field, and click the buy button. After buying the token, Here are some following important parameters:
  • You can’t buy a token less than the minimum buy.
  • You can’t buy a token more than the maximum buy.
  • If you are not whitelisted for the sale, you can’t buy the token from the launchpad sale.
8. MetaMask will now ask you to confirm the transaction. It will also show you the fee that you are required to pay for that transaction. If you agree, then click on the “Confirm” button to finish the process. Confirm all three transactions.
Emergency withdrawal from the launchpad:
Check out the below steps for emergency withdrawal from the launchpad with BxFinance using your MetaMask wallet.
  1. 1.
    Connect your wallet.
  2. 2.
    Click the Token Launchpad on the nav.
3. Click on “Launchpad List”.
4. Click on the "View Pool" Button on the launchpad sale.
5. Click the Emergency Withdraw button. Note: The Emergency Withdraw button only comes from the purchased sales. And the sale should be live. And for the emergency withdrawal, you should pay a 10% penalty from your inverse amount of token.
6. MetaMask will now ask you to confirm the transaction. It will also show you the fee that you are required to pay for that transaction. If you agree, then click on the “Confirm” button to finish the process. Confirm all three transactions.
Finalize the launchpad:
Check out the below steps for creating a launchpad with BxFinance using your MetaMask wallet.
  1. 1.
    Connect your wallet.
  2. 2.
    Click the Token Launchpad on the nav.
3. Click on “Launchpad List”.
4. Click on "View Pool". Button for your pool.
5. Once the launchpad pool has ended, you can see the Finalize pool button on the owner zone. Note: The owner only comes for only the owner.
6. Click the “Finalize pool” button
7. MetaMask will now ask you to confirm the transaction. It will also show you the fee that you are required to pay for that transaction. If you agree, then click on the “Confirm” button to finish the process. Confirm all three transactions.

Claim the token from the launchpad:

Check out the below steps to claim the token from a launchpad with BxFinance using your MetaMask wallet.
  1. 1.
    Connect your wallet.
  2. 2.
    Click the Token Launchpad on the nav bar.
3. Click on “Launchpad List”.
4. Click on "View Pool". Button for your pool.
5. Once the launchpad pool has been finalized, you can see the claim token button.
6. Click the claim token button.
7. MetaMask will now ask you to confirm the transaction. It will also show you the fee you must pay for that transaction. If you agree, click the “Confirm” button to finish the process.
whitelist the launchpad:
Check out the below steps for creating a launchpad with BxFinance using your MetaMask wallet.
  1. 1.
    Connect your wallet.
  2. 2.
    Click the Token Launchpad on the nav bar.
3. Click on “Launchpad List”.
4. Click on "View Pool". Button for your pool.
A. Enable whitelisting the launchpad:
  1. 1.
    In the owner zone, you can see the Enable whitelist button. Note: The owner only whitelists the users. Click the Enable whitelist button to enable the whitelist function for the sale.
2. MetaMask will now ask you to confirm the transaction. It will also show you the fee you must pay for that transaction. If you agree, click the “Confirm” button to finish the process.
B. Add users to the whitelist of the launchpad:
  1. 1.
    After enabling whitelisting, In the owner zone, you can see the Add users to whitelist button. Note: The owner only whitelists the users. Click the Add users to whitelist button.
2. Enter the user's wallet address in the address text area. Note: You can enter multiple users’ wallet addresses at the same time. Enter the user's wallet address separated by a comma.
3. After entering the address click the submit button. Note: You need to enter a valid wallet address.
4. MetaMask will now ask you to confirm the transaction. It will also show you the fee you must pay for that transaction. If you agree, click the “Confirm” button to finish the process.
C. Remove users to the whitelist of the launchpad:
  1. 1.
    After enabling whitelisting, In the owner zone, you can see the Add users to whitelist button. Note: The owner only whitelists the users. Click the Add users to whitelist button.
2. Enter the user's wallet address in the address text area. Note: You can enter multiple users’ wallet addresses at the same time. Enter the user's wallet address separated by a comma.
3. After entering the address click the submit button. Note: You need to enter a valid wallet address. And also make sure entered addresses are whitelisted.
4. MetaMask will now ask you to confirm the transaction. It will also show you the fee you must pay for that transaction. If you agree, click the “Confirm” button to finish the process.
D. Disable whitelisting the launchpad:
  1. 1.
    After enabling whitelisting, In the owner zone, you can see the Diable whitelist button. Note: The owner only whitelists the users. Click the Disable whitelist button to disable the whitelist function for the sale.
2. MetaMask will now ask you to confirm the transaction. It will also show you the fee you must pay for that transaction. If you agree, click the “Confirm” button to finish the process.